Chapter 7: Unsetting After An Alarm - Pyronix Wireless Alarm system User Manual

C H A P T E R 7 : U N S E T T I N G A F T E R A N A L A R M
Ø Enter your user code
Or
Ø Present a valid tag
Ø The alarm symbol will flash indicating
there has been an alarm activation,
the keypad will display which input has
activated.
Ø Press
the key to reset the system
UNSETTING AFTER AN ALARM USING A WIRELESS KEY-FOB
PLEASE NOTE: Unsetting with a key-fob will
only be allowed if your engineer has
enabled this.
Ø To unset via a key-fob. Press the
key
Ø The key-fob LED will start to flash
GREEN indicating that the system has
unset.
Ø Resetting the system after an alarm
can only be done at the keypad.
Page: 10