Chapter 1: Introduction - Pyronix Wireless Alarm system User Manual

C H A P T E R 1 : I N T R O D U C T I O N
Your control panel is a two-way wireless security alarm that boasts 32 wireless inputs, 32
wireless key-fobs and 2 wireless bells.
The wireless devices that you can add to your control panel comprise a range of wireless PIRs,
universal transmitters and a shock sensors; the control panel also allows the addition of 2 DEOL
wired inputs.
The system also has 80 user codes/tags, 32 of which may be programmed as a wireless key-fob
that can either set/unset the system or control an output (by latching the output or activating
the output for a programmable time period).
There are also 3 wired outputs on-board the control panel; PGM, STB and BELL, all of which are
programmable (BELL and STB are defaulted to work on a bell box). An output expander may also
be connected allowing an additional 16 wired outputs.
Up to four set points can be used on the control panel (maximum of 4 keypads or 3 tag readers).
Your control panel is a level set system which may be set up in the following way:
A user can choose which level set to arm, for example:
Level Set A: Full set of the house
Level Set B: Upstairs set. Downstairs unset.
Level Set C: Garage set. Rest of house unset.
Your engineer will be able to design the system according to your needs.
The control panel can be set up to communicate to an alarm receiving centre which can monitor
all activations of your property. You can also have SMS texts sent to your phone when alarm
activation has occurred. Please ask your engineer for more information.
Page: 4