Config File - LevelOne WAP-6011 User Manual

Wireless Access Point User Guide

Config File

This screen allows you to Backup (download) the configuration file, and to restore (upload) a
previously-saved configuration file.
You can also set the Wireless Access Point back to its factory default settings.
To reach this screen, select Config File in the main menu.
Data - Config File Screen
Backup
Save a copy of cur-
rent settings
Restore
Restore saved settings
from a file
Defaults
Revert to factory
default settings
Figure 52: Config File Screen
Once you have the Access Point working properly, you should
back up the settings to a file on your computer. You can later
restore the Access Point's settings from this file, if necessary.
To create a backup file of the current settings:

Click Backup.

If you don't have your browser set up to save downloaded
files automatically, locate where you want to save the file, re-
name it if you like, and click Save.
To restore settings from a backup file:
1. Click Browse.
2. Locate and select the previously saved backup file.
3. Click Restore
To erase the current settings and restore the original factory
default settings, click Factory Defaults button.
Note!

This will terminate the current connection. The Access Point
will be unavailable until it has restarted.

By default, the Access Point will act as a DHCP client, and
automatically obtain an IP address. You will need to deter-
mine its new IP address in order to re-connect.
52