Firmware Update; About Firmware Versions; Manually Updating Firmware - LevelOne WAP-6110 User Manual

300mbps wireless poe access point
Hide thumbs Also See for WAP-6110:
Table of Contents

Advertisement

12

Firmware Update

Note

About firmware versions

Firmware is a software program. It is stored as read-only
memory on your device.
Your device can check whether there are later firmware
versions available. If there is a later version, you can download
it via the Internet and install it on your device.
If there is a firmware update available you are strongly advised to
install it on your device to ensure that you take full advantage of
any new feature developments.

Manually updating firmware

You can manually download the latest firmware version from
provider's website to your PC's file directory.
Once you have downloaded the latest firmware version to your
PC, you can manually select and install it as follows:
1. From the left-hand Management menu, click on Upgrade
Firmware Upgrade. The following page is displayed:
2. Click on the Browse... button.
Figure 8:
Manual Update Installation section
(Note that if you are using certain browsers (such as Opera
7) the Browse button is labeled Choose.)
Use the Choose file box to navigate to the relevant directory
where the firmware version is saved.
3. Once you have selected the file to be installed, click Open.
The file's directory path is displayed in the New Firmware
Image: text box.
4. Click Upload. The device checks that the selected file
contains an updated version of firmware. A status screen
pops up, please wait for a while.......
115

Advertisement

Table of Contents
loading

Table of Contents