Yellowtec Digital Voice Processor Manual page 64

9. The following warning window appears on the PC screen:
Note: A transmission of unsuitable or faulty data or interruptions during the data transmission to the
base unit may corrupt the function of VIPdigital permanently. In this case the unit can only be
commissioned by the manufacturer.
Enter the file name
VIPfirmw401.vup (this designation is an example only).
If the firmware is in the same folder as the active configuration software, the entry of the file name
will suffice. If the firmware is not in the same folder as the active configuration software, enter the
complete path, e.g.. C:\Program Files\Yellowtec\VIPdigital/VIPfirmw401.vup (an example only)
Click on the YES button if you are sure that your entries are correct.
The progress of transmission is displayed in a Processing window. Never interrupt this process.
After successful transmission both Processing window and Update window close automatically.
10. Select SAVE TO UNIT from the UNIT menu. The current configuration is saved to VIPdigital under
control of the updated firmware.
11. Exit VIPcon
VIPdigital Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
(see below) of the new firmware to be transferred into the text line, e.g.
Page 64