Online Operation; Offline Operation - Yellowtec Digital Voice Processor Manual

7.3 Online operation

At this point we assume, that a data link in between your PC and your VIPdigital is established and
working. If not, or if you have any further questions concerning this subject, please go back to Chapter
CONNECT VIPdigital to your COMPUTER.
VIPcon is designed for configuring your VIPdigital. First of all, perform the basic settings and transfer
them to VIPdigital.
Note: Your settings will not be transferred until the Save to Unit command is selected.
VIPdigital will store your settings in its non-volatile memory.
Conversely, you may also load the configuration stored in your VIPdigital to VIPcon for checking and
editing. (Refer to: Load from Unit)

7.4 Offline operation

Also, you may work with VIPcon offline, i.e. without any VIPdigital processor connected.
During the start of program VIPcon will search for a connected VIPdigital on the serial interfaces of
your PC. If no VIPdigital is found, the following dialog will appear (the text contents may vary
depending on the PC).
Clicking on the YES button starts VIPcon offline. In offline operation mode you may load configuration
files (*.dvp) already stored in your PC, edit them and store them again.
In addition, this operating mode is useful for a familiarisation or for demonstration purposes.
VIPdigital Manual 4.0 Yellowtec 2004 Rev. 26.07.2004 Page 25