Start-Up Mode - Yellowtec Digital Voice Processor Manual

8.1.4 Start-Up Mode

new in version 4.0!
The left-hand area contains elements for the preset administration. The preset lists are "empty", i.e.
settings and designations are neutral.
The buttons in the lower section of the program window are designed to transmit presets between the
PC and the processor and save or load presets to the hard disk of your PC. As a start, you may load
default presets (default.vip / default.vsm / default.vpr) by clicking on the
to Loading from the PC).
The right-hand larger area of the program window is deactivated. It contains a total of 14
Processing Modules for sound editing and an adaptation of the input signal. Modules are hidden in
Start-up mode.
Features of start-up mode
- presets can be loaded from your VIPdigital / SmartCard / PC without affecting audio
performance
presets can be saved to your VIPdigital / SmartCard /PC without affecting audio performance
-
only after a click on a preset from the
-
Processing Module will be activated (and fully visible) and VIPdigital switches to
Control operation.
- the new start-up mode allows you smoothly to take over
Example: After starting the application, click on
SmartCard Presets (if SmartCard is inserted) are loaded from the unit without affecting VIPdigital
audio performance. After loading, VIPremote displays in bold letters the one preset, which was
selected on VIPdigital at the time the download started (Internal or SmartCard preset). For a soft
VIPdigital Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
Internal Preset list or the
Remote Control
LOAD FROM VIP. All presets, Internal Presets and
LOAD FROM PC button (refer
Audio
SmartCard Preset list the Audio
Remote
of your VIPdigital
Page 40