Help Call; Info Window; Exit Vipremote - Yellowtec Digital Voice Processor Manual

"takeover", click on this very preset thus taking over Remote Control. Modify your settings, save
them to VIPdigital or to SmartCard. Exit VIPremote when your modifications are done. VIPdigital
returns to stand-alone operation (to the preset displayed in bold letters, which was active before).
Note: All functions are described more detailed in the following.

8.1.5 Help call

Click on the HELP button or press
The Online Manual is then started automatically with Acrobat Reader. Activate the Bookmark View to
navigate conveniently through the document, using the table of contents.
Refer to the chapter Prior to Beginning / Manual Conventions /
information.

8.1.6 Info window

Click on the INFO button to call the current version numbers of the software and firmware;
VIP Remote Software x.xx
-
- VIP digital Software x.xx
otherwise, the display shows 0.00 or the last value.
VIP.INI Version x.xx
-
Refer to the chapter Update VIPdigital
Software Components of VIPdigital

8.1.7 Exit VIPremote

Click on the X symbol in the upper right-hand corner of the program window
VIPdigital Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
F1 if information is required.
(the first three digits with a period behind the first digit are important).
(firmware in VIPdigital 19" unit) is only displayed if a unit is connected;
(file without user data and user access, only for service).
and to the chapter Technical Drawings / Descriptions under
for detailed information.
Use of the Screen for detailed
Page 41