One-Off Setting During Drink Preparation - Jura IMPRESSA C5 Manual

3 Familiarising yourself with the control options
One-off setting during One-off setting during
drink preparation drink preparation
22
Example: this is how to prepare an Espresso.
l Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting
m l Press the Rotary Switch to initiate preparation of the
Espresso.
The 1 Espresso symbol
amount of water will fl ow into the cup.
Drink preparation stops automatically.
You can change both the coffee strength and the amount of
water while your drink is being prepared. These settings are not
saved.
One-off settings during coffee preparation always follow this
model.
During the grinding operation, the light segments above
o
the Rotary Switch indicate the coffee strength. The coffee
strength can be altered while 1 Espresso or 1 coffee is
being prepared.
The coffee strength options available are as follows:
Coffee strength
Mild
Normal
Strong
During the brew operation, the light segments indicate the
o
amount of water. At this stage of the operation, you can
change the amount of water by turning the Rotary Switch.
Example: this is how to prepare a strong coffee.
Place a cup under the coffee spout.
l
ä l Turn the Rotary Switch to the 1 coffee setting
a will now fl ash, and the pre-set
Shown in symbol display
1 light segment is illuminated
2 light segments are illuminated
3 light segments are illuminated
a .
d .