Preparation At The Touch Of A Button; One-Off Settings Before And During Preparation - Jura IMPRESSA S9 One Touch Classic Manual

3 Familiarizing yourself with the control options
Preparation at the
touch of a button
One-off settings before
and during preparation
Changing the coffee
strength before preparation
20
Prepare your favourite coffee specialty at the touch of a button.
All coffee specialties are prepared following this model.
Example: This is how to prepare one coffee.
Precondition:
COFFEE READY
T Place a cup under the coffee spout.
o T Press the 1 Coffee button.
and the pre-set coffee strength is displayed.
1 COFFEE
The pre-set amount of water flows into the cup. Preparation
stops automatically.
COFFEE READY
E To prepare 2 coffees, place two cups under the coffee spout
and press the 2 Coffees button d.
It is possible to make various settings before and during preparation.
These one-off settings are always follow the same model and are not
stored.
The coffee strength of Coffee à la Carte can be changed before
preparation. The following coffee strength options can be selected:
(xmild)
Z
ö
(mild)
Z
öö
(normal)
Z
ööö
(strong)
Z
öööö
(xstrong)
Z ööööö
Example: Proceed as follows to to prepare a strong cup of Coffee à
la Carte.
Precondition:
COFFEE READY
T Place a cup under the coffee spout.
T Open the cover of the Rotary Switch.
e T Press the Coffee à la Carte button.
A LA CARTE
g T Turn the Rotary Switch until
displayed.
k T Turn the Rotary Switch while
displayed.
A LA CARTE öööö
into the cup. Preparation stops automatically.
is displayed.
appears on the display.
ENJOY
is then displayed.
is displayed.
and the pre-set coffee strength is displayed.
A LA CARTE öööö
A LA CARTE öööö
, the pre-set amount of water flows
is
is
ENJOY