Rinsing The Machine; Changing The Fi Lter - Jura IMPRESSA C5 Manual

8 Maintenance

Rinsing the machine

Rinsing the machine
Changing the fi lter Changing the fi lter
Replacement following a Replacement following a
prompt prompt
40
Once the IMPRESSA has heated up following switch-on,
o
the Maintenance symbol
perform a rinse operation. To initiate the rinse operation,
press the Rotary Switch.
When the IMPRESSA is switched off, a rinse operation is
o
automatically performed.
Precondition: the IMPRESSA is ready for use.
l Place a receptacle under the coffee spout.
ä l Turn the Rotary Switch so that it points to the Maintenance
symbol h .
m l Press the Rotary Switch to start the rinse operation.
The rinse operation now starts and the Maintenance
symbol h fl ashes.
Rinsing stops automatically.
Your IMPRESSA is ready for use.
After 50 litres of water have been dispensed, the fi lter will
o
cease to work. Your IMPRESSA will automatically prompt
you to replace the fi lter.
After two months, the fi lter will cease to work. Monitor the
o
elapsed time as shown on the date plate on the cartridge
holder.
If the CLARIS plus fi lter cartridge is not activated, you
o
will not be prompted to change the fi lter.
To change the CLARIS plus fi lter cartridge when prompted to do
so by your IMPRESSA, you should proceed as follows:
Precondition: the Maintenance indicator and the Filter
indicator are illuminated.
n
l Remove the water tank and empty it.
h will light up, prompting you to