Adjusting Grinder - Jura IMPRESSA C5 Manual

Adjusting grinder

Adjusting grinder
CAUTION CAUTION
2 Preparing and using your IMPRESSA for the fi rst time
Example: to change the water hardness from level 3 to level 4,
proceed as follows:
Precondition: your IMPRESSA must be switched off (standby
mode).
l Open the access door.
Hold down the Descaling button until the Descaling indi-
b l
cator lights up.
b
The Descaling indicator
now light up.
ä l Turn the Rotary Switch until the four symbols
light up.
m l Press the Rotary Switch to confi rm the level 4 setting.
The IMPRESSA will switch itself off (into standby
mode). The water hardness is now set.
You can adjust the grinder to suit the roast of your coffee.
If you adjust the fi neness of grind when the grinder is not
operating, the fi neness of grind switch could be damaged.
l Only adjust the fi neness of grind when the grinder is running.
Our recommendations:
p
Select a fi ne setting for a light roast.
p
Select a coarse setting for a darker roast.
Example: to change the fi neness of grinding during preparation
of a coffee, proceed as follows:
l Open the cover of the bean container and remove the
aroma preservation cover.
l Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting
and the symbols
b
A S D will
a s d f
D .
19