Jura IMPRESSA C5 Manual page 17

2 Preparing and using your IMPRESSA for the fi rst time
Precondition: your IMPRESSA must be switched off (standby
mode).
l Open the access door.
Hold down the Filter button until the Filter indicator
n l
lights up.
Turn the Rotary Switch until the 3 light segments around
ä l
the Rotary Switch light up.
When the 3 light segments light up, the fi lter is activated.
o
If none of the light segments light up, this means that the
fi lter has not been activated.
Press the Rotary Switch to confi rm the setting.
m l
The light segment by the switch will now fl ash.
l Place a receptacle (containing at least 500 ml) under
the Easy-Auto-Cappuccino Frother.
If the milk pipe is connected, remove it.
l
r l Turn the switch in the anticlockwise direction.
Rinsing of the fi lter will now begin. The light segment by
the switch will light up.
The water could be slightly discoloured. This is not harmful to
health, nor does it affect the taste.
Rinsing of the fi lter will automatically stop after approx.
500 ml, and the light segment by the switch will then
fl ash.
t l Turn the switch in the clockwise direction.
The IMPRESSA will switch itself off (into standby
mode). The fi lter is now activated.
n
17