Milk Foam - Jura IMPRESSA C5 Manual

5 Preparing drinks at the touch of a button

Milk foam

Milk foam
34
l Open the fi ller funnel for pre-ground coffee.
l Place one level measuring spoon of pre-ground coffee in
the fi ller funnel.
l Turn the Rotary Switch to the 1 coffee setting
ä
l Press the Rotary Switch to initiate preparation of the
m
coffee.
The symbols for pre-ground coffee
fl ash, and the pre-confi gured amount of water will fl ow
into the cup.
Drink preparation stops automatically.
To prepare two cups of pre-ground coffee, place two cups under
the coffee spout, add two level measuring spoons of pre-ground
coffee to the fi ller funnel, turn the Rotary Switch to the symbol
for 2 coffees f and then press to initiate preparation of the
coffee.
Precondition: Your IMPRESSA is ready to use, the Easy-Auto-
Cappuccino Frother is mounted.
l Take the milk pipe out of the Welcome Pack.
l Take the protective cap off the Easy-Auto-Cappuccino
Frother.
l Attach the milk pipe to the frother.
l Insert the other end in a milk Tetrapack or connect it to
a milk container.
l Place a cup under the Easy-Auto-Cappuccino Frother.
ä l Turn the Rotary Switch so that it points to the Steam
symbol k .
l Press the Rotary Switch to confi rm your choice.
m
The Steam symbol
IMPRESSA has warmed up. As soon as the required
temperature has been reached, the light segment by the
switch will fl ash.
j and 1 coffee
k will continue fl ashing until the
d .
d will