Table of Contents
Advertisement
2.
Release the front-facing webcam (2) from the retention molding built into the
display panel assembly.
3.
Remove the front-facing webcam and cable.
Reverse this procedure to install the front-facing webcam.
Power/volume button board
Description
Power/volume button board (includes cable)
Before removing the power/volume button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cables from the system board (see
Remove the power/volume button board:
1.
Release the ZIF connector (1) to which the power/volume button board cable is attached, and
then disconnect the power/volume button board cable from the system board.
18
Chapter 5 Removal and replacement procedures
Back cover on page
11).
Spare part number
753188-001
Battery on page
13).
Advertisement
Table of Contents
