Table of Contents
Advertisement
Power/volume button board
Description
Power/volume button board (includes cable)
Before removing the power/volume button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
a.
Battery (see
b.
Audio jack board (see
c.
System board (see
d.
Speakers (see
e.
Webcam module (see
f.
Remove the middle frame (see
Remove the power/volume button board:
1.
Release the ZIF connector (1) to which the power/volume button board cable is attached, and then
disconnect the power/volume button board cable from the system board.
2.
Remove the Phillips PM1.9×2.6 broad head screw (2) that secures the power/volume button board to
the display panel assembly.
Back cover on page
Battery on page
22)
Audio jack board on page
System board on page
Speakers on page
30)
Webcam module on page
Middle frame on page
19), and then remove the following components:
25)
26)
29)
32).
Spare part number
784417-001
Power/volume button board
33
Advertisement
Table of Contents
