Infrared Sensor Board - HP TouchSmart 9300 Elite Maintenance & Service Manual

Infrared sensor board

Description
Infrared sensor board
The infrared board is located on the bottom left side of the computer, under the left speaker. It is
secured with one screw and has one connector.
Figure 7-56
To remove the infrared board:
1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. Remove the right and left rear panels (see
4. Remove the left cap (see
5. Remove the right cap (see
6. Remove the rear logo cover (see
7. Remove the rear main frame (see
8. Remove the speakers (see
9. Disconnect the cable from the board (1) and remove the screw (2) that secures the board to the
computer.
NOTE:
pull on the wires.
80 Chapter 7 Removal and Replacement Procedures
Infrared board location
Stand on page
Left cap on page
Right cap on page
Speakers on page
Be careful not to damage the cable when disconnecting it from the connector. Do not
Preparing to disassemble the computer on page
34).
Rear panels on page
60).
66).
Rear logo cover on page
Main rear frame on page
78).
Spare part number
652307-001
46).
71).
74).
33).