HP TouchSmart 9300 Elite Maintenance & Service Manual page 101

Figure 7-69 TV tuner location
To remove the WLAN module:
1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. Remove the right and left rear panels (see
4. Remove the left cap (see
5. Remove the right cap (see
6. Remove the rear logo cover (see
7. Remove the rear main frame (see
8. Remove the system board shield (see
9. Disconnect the antenna cables from the module (1). The number of antenna cables may vary.
10. Remove the screw (2) that secures the module to the computer.
Preparing to disassemble the computer on page
Stand on page 34).
Rear panels on page
Left cap on page 60).
Right cap on page 66).
Rear logo cover on page
Main rear frame on page
System board shield on page
46).
71).
74).
76).
WLAN module and TV tuner module
33).
93