Hard Drive Connector - HP TouchSmart 9300 Elite Maintenance & Service Manual

Hard drive connector

The hard drive connector is located near the middle of the computer. You must remove the stand
bracket get to the connector's screws. It is secured with two screws and has two connectors. The
cables are taped to the computer.
Figure 7-63
To remove the hard drive connector:
1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. Remove the right and left rear panels (see
4. Remove the left cap (see
5. Remove the right cap (see
6. Remove the rear logo cover (see
7. Remove the rear main frame (see
88 Chapter 7 Removal and Replacement Procedures
Hard drive connector location
Stand on page
Left cap on page
Right cap on page
Preparing to disassemble the computer on page
34).
Rear panels on page
60).
66).
Rear logo cover on page
Main rear frame on page
46).
71).
74).
33).