Touch sensor board
NOTE:
The touch sensor board is located on the right side of the computer (viewed from behind)
above the system board. It is secured with one Torx screw and has three connectors.
Touch sensor boards are spared with the touch panel spare part kit. Be sure to replace the touch
sensor board when replacing a touch display panel.
Figure 7-42
To remove the touch sensor board:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Disconnect the cables from the three connectors on the board (1).
NOTE:
pull on the wires or cables.
Touch sensor board location
Be careful not to damage the cables when disconnecting them from the board. Do not
Preparing to disassemble the computer on page
Access panel on page
36).
Touch sensor board
32).
63