G-Sensor Board - HP TouchSmart 9300 Elite Maintenance & Service Manual

G-sensor board

Description
G-sensor board
G-sensor cable
The G-sensor board is mounted on the touchscreen glass. It senses when you tap on the glass, and it
wakes the system if in standby mode. It is attached to the glass with adhesive.
Figure 7-75
To remove the G-sensor board:
1. Prepare the computer for disassembly (see
2. Remove the stand (see
3. Remove the right and left rear panels (see
4. Remove the left cap (see
5. Remove the right cap (see
6. Remove the rear logo cover (see
7. Remove the rear main frame (see
8. Remove the system board shield (see
9. Remove the fan (see
10. Remove the fan sink (see
11. Remove the graphics board (see
12. Remove the WLAN module and TV tuner module (see
on page
13. Remove the system board (see
14. Remove the display (see
G-sensor board location
Stand on page
Left cap on page
Right cap on page
Fan on page
Fan Sink (Thermal Module) on page
92).
Display Panel on page
Preparing to disassemble the computer on page
34).
Rear panels on page
60).
66).
Rear logo cover on page
Main rear frame on page
System board shield on page
82).
Graphics board on page
System Board on page
97).
Spare part number
658983-001
658984-001
46).
71).
74).
76).
84).
90).
WLAN module and TV tuner module
95).
33).
G-sensor board 99