Webcam Module - HP TouchSmart 9300 Elite Maintenance & Service Manual

Webcam module

Description
Webcam module without DMIC
Webcam module, 2.0 MP, FHD
Webcam lens cover
Webcam wheel cap
The webcam module is located at the top of the computer. It is secured with two screws and has one
connector.
Figure 7-46
To remove the webcam module:
1. Prepare the computer for disassembly (see
2. Remove the left and right rear panels (see
3. Remove the rear logo cover (see
4. Remove the two screws (1) that secure the webcam module to the computer.
5. Disconnect the cable from the system board (2).
72 Chapter 7 Removal and Replacement Procedures
Webcam module location
Preparing to disassemble the computer on page
Rear panels on page
Rear logo cover on page
Spare part number
652277-001
658985-001
654598-001
658986-001
46).
71).
33).