Rear-Facing Webcam Module - HP ZBook x2 Manual

Reverse this procedure to install the front-facing webcam/microphone module.

Rear-facing webcam module

Description
Rear-facing webcam module (includes cable and double-sided adhesive)
Before removing the rear-facing webcam module, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
5. Remove the front-facing webcam/microphone module (see
on page
Remove the rear-facing webcam module:
1. Release the ZIF connector (1) to which the rear-facing webcam module cable is connected, and then
disconnect the rear-facing webcam module cable from the system board.
2. Detach the rear-facing webcam module (2) from the back cover. (The rear-facing webcam module is
attached to the back cover with double-sided adhesive.)
3. Remove the rear-facing webcam module.
Reverse this procedure to install the rear-facing webcam module.
42).
Display panel assembly on page
Front-facing webcam/microphone module
Spare part number
L03251-001
30).
Component replacement procedures 43