Table of Contents
Advertisement
Webcam/microphone module
Description
Webcam/microphone module (includes 2 microphone rubber isolators and double-sided adhesive)
NOTE:
The webcam/microphone module spare part kit does not include the webcam/microphone
module cable. The webcam/microphone module cable is available using spare part number
841550-001.
Before removing the webcam/microphone module, follow these steps:
1.
Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on,
and then shut it down through the operating system.
2.
Disconnect all external devices connected to the slate.
3.
Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4.
Disconnect the slate from the keyboard/base.
5.
Remove the display panel assembly (see
Remove the webcam/microphone module:
1.
Disconnect the webcam/microphone module cable (1) from the system board.
2.
Release the webcam/microphone module cable from the retention clips (2) built into the display
back cover.
3.
Remove the microphone rubber isolators (3).
The rubber isolators are included in the webcam/microphone module spare part kit.
Display panel assembly on page
Component replacement procedures
Spare part number
841773-001
22).
27
Advertisement
Table of Contents
