What To Do If The Admin Password Has Been Forgotten - ADDER AdderView CATxIP 1000 User Manual

What to do if the ADMIN password has been forgotten

If.the.ADMIN.password.becomes.mislaid.or.forgotten,.you.will.not.be.able.to.
access.the.AdderView.CATxIP.1000.to.add.or.edit.users.and.computer.names..
This.situation.may.be.resolved.by.performing.a.complete.reset.to.return.the.
AdderView.CATxIP.1000..
IMPORTANT: A complete reset erases all the user names and computer
names that you have setup.
To clear a password (and restore factory default settings)
1. Remove.power.from.the.AdderView.
CATxIP.1000.unit.
2. Press.and.hold.the.reset.button.on.
the.front.panel.(requires.paper.clip.or.
similar).
3. Apply.power.and.after.a.couple.of.
seconds.release.the.reset.button..The.
Maintenance.menu.will.be.displayed.
4. Highlight.'Reset.Configuration'.and..
press. ..The.Reset.Config.warning.will.

be.displayed.
5. Highlight.'Reset'.and.press.
settings.will.be.returned.to.their.factory.
defaults.and.the.previous.Maintenance.
menu.will.be.re-displayed.
6. Remove.power.from.the.unit.and.then.
re-apply.it.
7. You.now.need.to.go.through.the.initial
configuration procedure.and.re-
instate.all.of.the.required.settings.
  
   

 
 

   
   
   
   
 
..All.
     
    
   
 
    
 