Standard hotkeys
The.range.of.hotkey.combinations.are.as.follows:
Note: If your hotkeys have been changed, substitute them for
the examples given here.
.
.
.
Selects.port.1
.
.
.
Selects.port.2
•.
•
•.
•
.
.
.then.
.
Selects.port.10
.
Note: When entering multiple digit addresses as
above, keep
other numbers have been entered.
.
.
.
Selects.the.next.available.port
.
.
.
Switches.off.the.video.signal.–.this.will.cause.
a.power.saving.monitor.to.enter.its.standby.
mode..To.awaken.the.monitor,.simply.select.
any.fixed.channel.using.any.of.the.suggested.
methods.
.
.
.
Logs.out.the.current.user.(if.security.is.enabled).
or.selects.port.0.to.disable.the.video.signal.(if.
security.is.disabled).
.
.&.
,.
,. .or.
..
Moves.the.currently.displayed.on-screen.menu.
around.the.screen..
and
in
and
pressed down until all
To select a computer using the Select Host menu
1. Display.the.Select.Host.menu.in.one.of.two.ways:.
•. By.simultaneously.pressing.and.then.releasing.
•. By.pressing.the.middle.and.right.buttons.of.a.three.button.mouse.
Note: The mouse switching option is usable only if the 'Mouse
Switching' option is enabled. See
At.this.point,.depending.on.the.security.settings.and.the.current.log.in.
situation,.one.of.two.things.will.be.displayed,.either.the.login.screen,.or.the.
Select.Host.menu:.
2. Use.the.
.and.
.keys.(or.the.scroll.wheel.of.an.IntelliMouse).to.highlight.
the.required.computer.name..Alternatively.(for.large.configurations),.press.
.to.perform.an.alphabetical.search.for.a.particular.port.name.
Note: If security has been enabled then only computers to which the current
user port has permission will be displayed.
3. Press.
.to.select.the.highlighted.port.
.
. ,.or.
Global preferences
for more details.
The Select Host menu.–.here.you.can.
select.computers.by.name.
Need help?
Do you have a question about the AdderView CATxIP 1000 and is the answer not in the manual?
Questions and answers