Enter Ip Address: 158.101.20.30; Enter Subnet Mask [255.255.0.0]; Defining An Atm Arp Server; Removing An Atm Arp Server - 3Com LANPLEX 2500 EXTENDEDPLEX®2500 EXTENDED User Manual

9-16 C 9: A
HAPTER DMINISTERING
Defining an ATM
ARP Server
Top-Level Menu
system
ethernet
interface
fddi
route
atm
arp
display
bridge
atmArpServer
define
ip
multicast
remove
ipx
udpHelper
arp
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
logout
statistics
Removing an ATM
ARP Server
Top-Level Menu
system
ethernet
interface
fddi
route
atm
arp
display
bridge
atmArpServer
define
ip
multicast
remove
ipx
udpHelper
arp
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
logout
statistics
IP R
OUTING
Determine the location of the ATM ARP server you want to use. You can
define the ATM ARP server externally on another LANplex system or on an
ATM switch, such as 3Com's CELLplex™ 7000 system.
1 To define an ATM ARP server, from the top level of the Administration
Console, enter:
ip atmArpServer define
2 Enter the number of the ATM port where you want to define the ATM ARP
server.
3 Enter the IP address of the ATM port you want to define.
4 Enter the subnet mask. To accept the default value, shown in brackets, press
the [Return] key at the prompt.
Example:
Select ATM port [1]

Enter IP address: 158.101.20.30

Enter subnet mask [255.255.0.0]

To delete a currently defined ATM ARP server, from the top level of the
Administration Console, enter:
ip atmArpServer remove
The systems prompts you for one or more index numbers associated with
the ATM ARP servers that you want to remove. The ATM ARP server display
shows the index number assigned to each ATM ARP server. The system also
displays the current index numbers in the prompt.
Example:
Select ATM ARP server index(es) [1-2,all]: 1