Displaying The Atm Arp Cache; Removing An Atm Arp Cache Entry - 3Com LANPLEX 2500 EXTENDEDPLEX®2500 EXTENDED User Manual

Displaying the ATM
ARP Cache
Top-Level Menu
system
ethernet
interface
fddi
route
display
atm
arp define
bridge
remove display
atmArpServer
ip
multicast arp remove
ipx
udpHelper flush
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
IP routing is enabled, RIP is active,
logout
statistics
ICMP router discovery is disabled
IP address
158.101.112.2
158.101.112.7
158.101.116.7
158.101.112.14
Removing an ATM
ARP Cache Entry
Top-Level Menu
system
ethernet
interface
fddi
route
display
atm
arp define
bridge display
remove
atmArpServer
ip
remove
multicast arp
ipx
flush
udpHelper
appletalk
routing
snmp
icmpRouterDiscovery
analyzer
rip
script
ping
logout
statistics
To display the contents of the ATM ARP cache, from the top level of the
Administration Console, enter:
ip atmArpServer arp display
Example:
ATM Address
47-005-80-ffe100-0000-f21a-2130-80000212d0f-18 1/32
47-005-80-ffe100-0000-f22a-2130-80000211d01-18 1/33
47-005-81-ffe100-0000-f21a-2130-80000112d01-18 2/20
47-005-81-ffe100-0000-f21a-2130-80000112d01-18 2/22
To remove an entry from the ATM ARP cache, from the top level of the
Administration Console, enter:
ip atmarpserver arp remove
Enter the ATM address you want to remove.
The address is immediately removed from the table.
Administering ATM ARP Servers 9-17
Circuit