Removing An Interface - 3Com LANPLEX 2500 EXTENDEDPLEX®2500 EXTENDED User Manual

12-4 C 12: A
HAPTER DMINISTERING
Removing an
Interface
Top-Level Menu
system
ethernet interface
fddi route display
atm
aarp define
bridge
zone
remove
ip
forwarding
ipx checksum
ping
appletalk
statistics
snmp
analyzer
script
logout
A T ® R
PPLE ALK OUTING
6 Enter the zone name.
You can enter up to 16 zone names per interface.
7 Type after entering all the zone names.
q
8 Enter the index of the AppleTalk VLAN associated with this interface.
Example:
Enter Start of Network Range:10000
Enter End of Network Range: 10100
Enter Default Zone:engineering
Enter Zone Name:q
Appletalk VLANs:
Index Ports
3 1-8
4 9-12
Select VLAN index: 3
You might want to remove an interface if you no longer perform routing on
the ports associated with the interface.
To remove an AppleTalk interface:
1 At the Administration Console's top-level menu, enter:
appletalk interface remove
2 Enter the index number(s) of the interface(s) you want to remove.
The interface is no longer defined on the router.