Example 2 - 3Com LANPLEX 2500 EXTENDEDPLEX®2500 EXTENDED User Manual

Example 2

Figure 2-2 is an example of a configuration that contains two different
protocol-sensitive VLANs (IP and IPX) with servers on separate high-speed
100BASE-T ports. The end-station clients share the same switch ports, yet
the IP and IPX traffic stays separate. See Figure 2-2.
.
IP Server
VLAN #1
Fast Ethernet
100 BASEt
LANplex 2500
Power Run
IPX Server
VLAN #2
IP Server
VLAN #1, #2, and #3
Figure 2-2 A VLAN Configuration with Servers on Separate 100BASE-T ports.
ERROR PCMCIA
Process Power Fan Temp Config Inserted
IP
About VLANs
= VLAN 1 (IP)
= VLAN 2 (IPX)
= VLAN 1 (IP) + VLAN 2 (IPX)
Modem Terminal
IP
IP
2-11
IPX
IPX
IPX