Flushing The Arp Cache; Administering Atm Arp Servers; Displaying Atm Arp Servers - 3Com LANPLEX 2500 EXTENDEDPLEX®2500 EXTENDED User Manual

Flushing the ARP
Cache
Top-Level Menu
system
interface
ethernet
route
fddi
display
arp
atm
remove
atmArpServer
bridge
multicast flush
ip
udpHelper
ipx
routing
appletalk
icmpRouterDiscovery
snmp
rip
analyzer
ping
script
statistics
logout
Administering
ATM ARP Servers
Displaying ATM
ARP Servers
Top-Level Menu
system
ethernet
interface
fddi
route
atm
arp
display
bridge
atmArpServer
define
ip
multicast
remove
ipx
udpHelper
arp
appletalk
routing
snmp
icmpRouterDiscovery
IP routing is enabled, RIP is active,
analyzer
rip
script ICMP router discovery is disabled
ping
logout
statistics
Index
You might want to delete all entries from the ARP cache if the MAC address
has changed.
To remove all entries from the ARP cache, from the top level of the
Administration Console, enter:
ip arp flush
The ARP cache entries are immediately removed from the table.
If you are running classical IP over ATM with SVCs, you need to define an
ATM ARP server for each LIS. Each LIS must connect to a single ATM network
and must belong to the same IP subnet.
The
atmArpServer
administer the ATM ARP cache.
To display a list of ATM ARP servers, from the top level of the Administration
Console, enter:
ip atmArpServer display
Example:
Port IP Address
1 1 158.101.1.1
ATM address
47-0000-00-000000-0000-0000-00cc-000000000000-ff

Administering ATM ARP Servers

menu also includes the
Subnet Mask
255.255.255.0
option, which allows you to
arp
9-15