Removing The Pci Riser-Card Assembly - IBM System x3620 M3 7376 Installation And User Manual

Removing the PCI riser-card assembly

The server comes with one PCI riser-card assembly that contains two PCI Express
Gen 2 x16 connectors and one PCI Express x8 connector.
To remove the PCI riser-card assembly, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cord and
3. Remove the cover (see "Removing the cover" on page 40).
4. Grasp the PCI riser-card assembly at the front grip point and rear edge; then, lift
42
System x3620 M3 Type 7376: Installation and User's Guide
on page 31.
all external cables.
the PCI riser-card assembly to remove it from the server. Place the PCI
riser-card assembly on a flat, static-protective surface.