Installing An Optional Dvd Drive Cage - IBM System x3620 M3 7376 Installation And User Manual

3. Remove the drive filler panel from the front of the server.
4. Pull the round blue loops of the hard disk drive toward each other; then, pull the
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 83.

Installing an optional DVD drive cage

The IBM System x3620 M3 DVD drive enablement kit is used to install an optical
drive cage in an IBM System x3620 M3 server. See http://www.ibm.com/servers/
eserver/serverproven/compat/us/ for a list of supported optional devices. To order a
DVD drive enablement kit, contact your IBM marketing representative or authorized
reseller.
The IBM System x3620 M3 DVD drive enablement kit contains the following
components:
v One DVD cable
v One optical drive cage
v One retention bracket
To install the optional DVD drive cage, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cord and
3. Remove the server cover (see "Removing the cover" on page 40).
4. Loosen the thumbscrew that secure the drive filler cage to the chassis; then,
drive out of the bay.
on page 31.
all external cables (see "Turning off the server" on page 19).
push the drive filler cage out of the bay to remove it from the server.
Chapter 2. Installing optional devices
57