5. Save the changes and exit Setup utility.
6. When the prompt Press <CTRL>-I to enter Configuration Utility ..
7. Follow the instructions on the screen to configure RAID.
IBM Advanced Settings Utility program
The IBM Advanced Settings Utility (ASU) program is an alternative to the Setup
utility for modifying UEFI settings. Use the ASU program online or out-of-band to
modify UEFI settings from the command line without the need to restart the server
to access the Setup utility.
You can also use the ASU program to configure the optional remote presence
features or other IMM settings. The remote presence features provide enhanced
systems-management capabilities.
In addition, the ASU program provides limited settings for configuring the IPMI
function in the IMM through the command-line interface.
Use the command-line interface to issue setup commands. You can save any of the
settings as a file and run the file as a script. The ASU program supports scripting
environments through a batch-processing mode.
For more information and to download the ASU program, go to
http://www.ibm.com/systems/support/.
Updating the firmware
Important: Some cluster solutions require specific code levels or coordinated code
updates. If the device is part of a cluster solution, verify that the latest level of code
is supported for the cluster solution before you update the code.
The firmware for the server is periodically updated and is available for download
from the Web. To check for the latest level of firmware, such as server firmware,
vital product data (VPD) code, device drivers, and service processor firmware, go to
http://www.ibm.com/supportportal/.
106
System x3620 M3 Type 7376: Installation and User's Guide
displays, press Ctrl+I.