Panasonic DP-CL18 Technical Manual page 27

DP-CL18
Home Position to accumulator Belt Cleaning Position". While this shifting, the first transfer roller (FTR) is released from the
accumulator belt by the mechanism (linked the cam ratchet wheel operation) in the accumulator tension unit. At the Toner
Transferring Position, the sensor tab arrives at the position shown in the Figure-2. If the signal ITHOME1 does not change within
the proper time while this shifting, the error message "Printer Error 24" is displayed on the LCD display.
After the proper time in the FTR Roller Release Position, the signal ITSOL changes from the low to the high, and the status of the
accumulator tension unit is shifted to the Home Position.
Shifting from FTR Roller Release Position to Home Position :
The status of accumulator tension unit is shifted to the Home Position in the same manner as the above "Shifting from Home
Position to accumulator Belt Cleaning Position". While this shifting, the second transfer roller (STR) is released from the
accumulator belt by the mechanism (linked the cam ratchet wheel operation) in the accumulator tension unit. The accumulator belt
is also released from the tension stress. At the Home Position, the sensor tab arrives at the home position shown in the Figure-2.
If the signal ITHOME1 does not change within the proper time while this shifting, the error message "Printer Error 24" is displayed
on the LCD display.
The timing chart regarding the accumulator tension unit operation is listed in the Figure-3.
27