To Display The Screen Indicators - Display Function - Sony DVCAM DSR-PDX10 Operating Instructions Manual

Playing back a tape
To display the screen indicators – Display function
Press DISPLAY/TOUCH PANEL on your camcorder or DISPLAY on the Remote
Commander supplied with your camcorder. The indicators disappear on the screen. To
make the indicators appear, press DISPLAY/TOUCH PANEL or DISPLAY again.
DATA CODE
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded)
Follow the steps below to display the data code using the touch panel or the Remote
Commander.
Using the touch panel
(1) Set the POWER switch to VCR, then play back a tape.
(2) Press FN and select PAGE2.
(3) Press DATA CODE.
(4) Select CAM DATA or DATE DATA, then press
(5) Press EXIT.
DISPLAY
DATACODE
OFF OK
CAM DATE
DATA DATA
DISPLAY/
TOUCH PANEL
(data code) .
OK.
43