Boot Menu - Getac V200 User Manual

Boot Menu

The Boot menu sets the sequence of the devices to be searched for the
operating system.
Main
Boot priority order:
1: USB FDC:
2: SATA HDD: INTEL SSDSA2M080G2GC – (S1)
3: USB KEY:
4: USB HDD:
5: LAN BOOT: IBA GE Slot 00C8 v1338
6:
7:
8:
Excluded from boot order:
: USB CDROM:
F1 Help
Esc Exit
The bootable devices will be automatically detected during POST and shown
here, allowing you to set the sequence that the BIOS uses to look for a device
from which to load the OS. Below is a brief description of keyboard usage:
Key
↑ , ↓
Selects (highlight) a boot device.
+, – Changes the boot sequence.
1 to 4 Loads the default boot sequence.
X Moves the highlighted boot device from the "Boot priority order"
list to the "Excluded from boot order" list, and vice versa.
Shift+1 Deactivates/activates the highlighted boot device on the "Boot
priority order" list. When a device has been deactivated, an "!"
(exclamation) symbol appears beside the item and system will
bypass it when detecting boot device during POST.
5-8
Using BIOS Setup and System Recovery
Advanced Security
Select Item -/+
↑↓
Select Menu Enter
←→
Boot Exit
Item Specific Help
Keys used to view or
configure devices:
Up and Down arrows
select a device.
<+> and <-> moves the
device up or down.
<f> and <r> specifies
the device fixed or
removable
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1 – 4> Loads default
boot sequence.
Change Values
Select Sub-Menu
Function
F9 Setup Defaults
F10 Save and Exit