Using The Sd Card Reader - Getac V200 User Manual

Using the SD Card Reader

NOTE:
If your hard disk is divided into several drives, make sure that all drives
have been formatted before using the Card Reader. Otherwise, you may
encounter problems when using the Card Reader.
You can use only storage cards. Your Card Reader does not support
cards with I/O (input/output) functions such as a wireless network card
or Bluetooth card.
Your computer has a Card Reader. The Card Reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The Card Reader supports Secure Digital (SD) cards.
To insert a storage card:
1. Locate the Card Reader slot on the left side of the computer.
2. Align the card with its connector pointing to the slot and its label facing
up. Slide the card into the slot until it reaches the end.
3. Windows will detect the card and assign it a drive name.
To remove a storage card:
1. Double-click My Computer.
2. Right-click the drive with the card and select Eject.
3. Push the card to release and then pull the card out of the slot.
Expanding Your Computer
4-11