System Recovery - Getac V200 User Manual

System Recovery

Use System Recovery when:
Your Windows operating system does not start at all.
You want to restore the factory default Windows settings.
WARNING: Using this feature will reinstall Windows to your system. All
data on the hard disk drive will be lost.
To run System Recovery:
1. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds.
2. The message
to factory default. All data on HDD will be lost
to ask if you want to access System Recovery. Type 1 to continue.
5-10
Using BIOS Setup and System Recovery
This will help you reinstall Windows to the whole HDD
appears on the screen