Bios Setup; When And How To Use - Getac V200 User Manual

BIOS Setup

When and How to Use

You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS
Setup Utility.
You want to restore the factory default BIOS settings.
You want to modify some specific settings according to the hardware.
You want to modify some specific settings to optimize the system
performance.
To run BIOS Setup Utility, press the F2 key when the prompt appears on the
screen during the system startup. The prompt shows up on the screen for
only a few seconds. You must press the F2 key quickly. The BIOS Setup Utility
main screen appears as shown next.
Main
Model:
SATA HDD:
System Time:
System Date:
Processor Info:
Installed System Memory:
System BIOS Version:
KBC/EC BIOS Version:
LAN MAC Address:
Serial Number:
F1 Help
Esc Exit
5-2
Using BIOS Setup and System Recovery
Advanced Security
V200-X
[INTEL SSDSA2M080G2GC] 80026MB
[16:33:08] 16
[07/05/2010]
Intel(R)Core(TM)i7 CPU U620@2.00GHz
2048MB
R1.01
R1.01u
00-22-20-0A-98-B4
12231241241324
Select Item -/+
↑↓
Select Menu Enter
←→
Boot Exit
Change Values
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit