Getac V200 User Manual page 93

Password on Boot allows you to enable or disable the entering of password
for booting up your system. Once the password is successfully set and this
item is enabled, it is required for booting up the system.
TPM Support enables or disables TPM support. TPM (Trusted Platform
Module) is a component on your computer's mainboard that is specifically
designed to enhance platform security by providing a protected space for
key operations and other security critical tasks.
NOTE:
To use the TPM feature, the TPM driver supplied with your computer
must be installed.
The next two items Current TPM State and Change TPM State would
only appear if the item TPM Support is set at Enabled.
Current TPM State shows the current TPM state.
Change TPM State allows you to select between
Deactivate & Disable Enable & Activate
, and
No Change
,
.
Using BIOS Setup and System Recovery
Clear
,
5-7