System Memory Upgrade - Getac V200 User Manual

System Memory Upgrade

You can upgrade your computer by changing system memory to a maximum
of 8 GB on the DDR3 SO-DIMM slot.
CAUTION: RAM modules are extremely sensitive to static electricity. There
are cases where static electricity generated by the human body has
adversely affected such modules. When inserting or removing a RAM
module, do not touch the terminals or internal components, insert objects
other than the module, or allow foreign particles to enter. Doing so has
been known to cause damage, fire, or electrical shock.
To install the RAM module:
1. Remove the battery pack (see chapter 3) and make sure that the
computer is not connected to AC power.
2. Carefully place the computer upside down.
3. Remove the four screws to open the compartment cover.
4-13
Expanding Your Computer