Getac V200 User Manual page 91

Digitizer Type or TouchScreen (actual item shown depends on your model)
Digitizer Type allows you to select the type of digitizer you are using.
TouchScreen allows you to unconditionally disable it when set at
Disabled
.
Serial Port COM1/COM2/COM4 allows you to unconditionally disable it
Disabled
when set at
Boot-time Diagnostic Screen allows you to display the diagnostic screen
during system boot-up.
Wake-On-LAN (WOL) allow a LAN activity to wake up the system from S3
(Sleep) state.
Turbo Mode enables or disables Processor Turbo Mode.
Intel Trusted Execution enables utilization of additional hardware
capabilities provided by Intel® Trusted Execution Technology.
Intel AMT Setup Prompt sets if the prompt for entering Intel AMT Setup
appears during POST. If disabled, you cannot enter Intel AMT Setup.
.
Using BIOS Setup and System Recovery
5-5