Advanced Menu - Getac V200 User Manual

Advanced Menu

The Advanced menu contains the advanced settings as shown next.
Main
Japanese Keyboard:
SATA Mode
Total Graphics Memory:
USB Wake-Up From S3
High Brightness Thermal:
TouchScreen:
Serial port COM1:
Serial port COM2:
Serial port COM4:
Boot-time Diagnostic Screen:
Wake-On-LAN(WOL)
Turbo Mode
Intel Trusted Execution
Intel AMT Setup Prompt:
F1 Help
Esc Exit
Japanese Keyboard enables support for the Japanese keyboard.
SATA Mode sets the mode to enhanced
IDE
Interface) or
mode is enabled.
Total Graphics Memory sets the amount of total graphics memory
(pre-allocated + fixed + DVMT) for use by the internal graphics device.
USB Wake-Up From S3 allow a USB device activity to wake up the system
from S3 (Sleep) state.
High Brightness Thermal allows dynamic control of maximum LCD
brightness level according to the ambient temperature. This helps protect
the LCD under over-heating situations.
5-4
Using BIOS Setup and System Recovery
Advanced Security
Select Item -/+
↑↓
Select Menu Enter
←→
. Turbo memory feature works only when the SATA AHCI
Boot Exit
[Disabled]
Disabled
[AHCI]
[MaxDVMT]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
Change Values
Select Sub-Menu
AHCI
(Advanced Host Controller
Item Specific Help
Support Japanese
Keyboard
F9 Setup Defaults
F10 Save and Exit