Boot Menu - Getac M230 Operation Manual

Boot Menu

The Boot menu sets the sequence of the devices to be searched for the
operating system.
The bootable devices will be automatically detected during POST and
shown here, allowing you to set the sequence that the BIOS uses to look
for a boot device from which to load the operating system.
A brief description of keyboard usage is listed next:
Key
↑ , ↓
Selects (highlight) a boot device.
+, – Changes the boot sequence.
1 to 4
Loads the default boot sequence.
f or r
Specifies if the device is fixed (f) or removable (r).
X
Moves the highlighted boot device from the "Boot priority order"
list to the "Excluded from boot order" list, and vice versa.
Shift + 1
Deactivates/activates the highlighted boot device on the "Boot
priority order" list. When a device has been deactivated, an "!"
(exclamation) symbol appears beside the item and system will
bypass it when detecting boot device during POST.
5-8
Function
Setup Configuration Utility (SCU)