Disassembling The Printer Mechanism; Removing The Printer Mechanism - Epson Stylus PhotoR280 Service Manual

EPSON Stylus Photo R280/R285/R290

4.4 Disassembling the Printer Mechanism

4.4.1 Removing the Printer Mechanism

Parts/Components need to be removed in advance
Printer Cover / Paper Support Assy / Upper Housing / Main Board Unit / Panel Assy /
Cover Open Sensor
Removal procedure
Be careful of the four sharp edges shown in the figure below
when assembling or reassembling.
Printer Mechanism Handling Precaution
When lifting the printer, hold
below to prevent the frame from deforming.
Figure 4-35. Printer Mechanism Handling Precaution (1)
Chapter 4 Disassembly/Assembly
parts shown in the figure
Sharp Edge
4.4.1 Removing the Printer Mechanism (Disassembling the Printer Mechanism)
Do not touch the PF Scale with bare hands or damage it.
If the Printer Mechanism is tilted leftward about 15°, the PF
Scale hits against the desk surface and can break. After
removing the Printer Mechanism, take extra care to protect
the PF Scale.
Figure 4-36. Printer Mechanism Handling Precaution (2)
1. Disengage the hook of the Ink Tube Cover using a flathead screwdriver and
remove the Ink Tube Cover.
Ribs
Ink Tube Cover
Hook
Figure 4-37. Removing the Ink Tube Cover
Revision B
About
15°
Do not tilt more than 15
degrees, or drag it while tilting.
69