Epson Stylus PhotoR280 Service Manual page 115

EPSON Stylus Photo R280/R285/R290
LUBRICATION OF FRONT PAPER GUIDE ASSY
Front Paper Guide Assy (left)
Application Point
Figure 6-4. Lubrication of Front Paper Guide Assy (1)
Front Paper Guide Assy (right)
Application Point
Application Point
Figure 6-5. Lubrication of Front Paper Guide Assy (2)
Chapter 6 Maintenance
<Lubrication Points>
PF Roller Shaft, EJ Roller Shaft and
Bushing (3 points)
<Type>
G-71
<Application Amount>
ø 1 x 3 mm x 3 points
<Application Timing>
Apply after installing the Front Paper
guide
<Remarks>
Apply with Injector
Make sure that the coated part of the
PF Roller Shaft and rubber rollers on
the EJ Roller are free from grease.
<Lubrication Points>
PF Roller Shaft, EJ Roller Shaft and
Bushing (2 points)
<Type>
G-71
<Application Amount>
ø 1 x 3 mm x 2 points
<Application Timing>
Apply after installing the Front Paper
guide
<Remarks>
Apply with Injector
Make sure that the coated part of the
PF Roller Shaft and rubber rollers on
the EJ Roller are free from grease.
6.1 Overview
LUBRICATION OF EJ FRAME ASSY
EJ Frame Assy Bushing
Left Right
Application Point
Figure 6-6. Lubrication of EJ Frame Assy
Front Frame contact point (left)
Rib
Notch for spring
Application Point
Figure 6-7. Lubrication of the Front Frame (1)
Revision B
<Lubrication Points>
EJ Frame Assy Busing
(Left/Right back side)
<Type>
G-71
<Application Amount>
ø1 x 1mm x 2 points
(Right busing, both inner sides)
ø1 x 3mm x 2 points
(Left busing, both inner sides)
<Application Timing>
Apply before installing the EJ Frame
<Remarks>
Apply with Injector
Apply to the both inner sides of the
left/right bushings.
<Lubrication Points>
Contact point between the Front Frame
and the PE Frame Assy
(2 points)
<Type>
G-71
<Application Amount>
ø1 x 7mm (Left rib)
ø1 x 3mm (Left notch for spring)
<Application Timing>
Apply before installing the Front Frame
<Remarks>
Apply with Injector
Apply to the inner edge of the notch
for spring.
115