Meci; Metw; Ipmi Configuration (X9Sci-Ln4F, X9Sca-F Only); Bmc Support - Supermicro Supero X9SCi-LN4 User Manual

Main Advanced Event Logs
 Change Smbios Event Log Settings
View Smbios Event Log
View System Event Log

MECI

The Multiple Event Count Increment (MECI) counter counts the number of oc-
curences a duplicate event must happen before the MECI counter is incremented.
This is a numeric value.

METW

The Multiple Event Time Window (METW) defines number of minutes must pass
between duplicate log events before MECI is incremented. This is in minutes, from
0 to 99.
4-5 IPMI Configuration (X9SCi-LN4F, X9SCA-F Only)
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
IT administrators can use to monitor system health and to manage the system as a
whole. For more information on the IPMI specifications, please visit Intel's website
at www.intel.com.

BMC Support

This feature enables or disables the installed Baseboard Management Controller
(BMC) on the motherboard. The options are Enabled and Disabled.

Wait For BMC

If enabled, the system will wait for a BMC response after the AC power is turned
on. It takes around 30 seconds to initialize Host to BMC interfaces. The options
are Disabled and Enabled.
BIOS SETUP UTILTY
IPMI Boot Security
Version x.xx.xxxx. Copyright (C) 2010 American Megatrends, Inc.
4-15
Exit
Press <Enter> to change
the Smbios Event Log
configuration.
 :
 :
Enter:
+/- :
F1 :
F2 :
F3 :
F4 :
ESC :
Chapter 4: AMI BIOS
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit