Installing Ddr3 Memory; Dimm Installation; Removing Memory Modules - Supermicro Supero X9SCi-LN4 User Manual

X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F User's Manual
2-3

Installing DDR3 Memory

Note: Check the Supermicro website for recommended memory mod-
ules.
Exercise extreme care when installing or removing DIMM

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots, starting with
DIMM1A (Slot A, Channel 1, see the
next page for the location). For best
performance, please use the memory
modules of the same type and speed
in the same bank.
2. Push the release tabs outwards on
both ends of the DIMM slot to unlock
it.
3. Align the key of the DIMM mod-
ule with the receptive point on the
memory slot.
4. Align the notches on both ends of
the module against the receptive
points on the ends of the slot.
5. Use two thumbs together to press
the notches on both ends of the
module straight down into the slot
until the module snaps into place.
6. Press the release tabs to the lock
positions to secure the DIMM module
into the slot.

Removing Memory Modules

Reverse the steps above to remove the
DIMM modules from the motherboard.
CAUTION
modules to prevent any possible damage.
Release Tabs
2-10
Notches
Press both notches
straight down into
the memory slot.