Bmc Self Test Log; System Event Log; When Sel Full; Log Efi Status Codes - Supermicro Supero X9SCi-LN4 User Manual

X9SCi-LN4/X9SCi-LN4F/X9SCA/X9SCA-F User Manual

BMC Self Test Log


This feature logs any BMC messages returned during a BMC self-test. It shows the
total number of entries and will allow the viewing of each event by scrolling down.
Erase Log - Select Yes, On every reset or No.
When Log is Full - Select Clear Log or Do Not Log Anymore.
Main Advanced Event Logs
BMC Support
Wait For BMC
 BMC self test log
 System Event log
 View FRU information
 BMC network configuration

System Event Log


This feature is used to change the Sytem Event Log (SEL) configuration.
SEL Components - Change this item to enable or disable all features of System
Event Logging. The options are Enabled and Disabled. When Enabled, the
following can be configured:
Erase SEL - This option erases all logged SEL events. The options are No,
Yes, On Next reset and Yes, On Every reset.

When SEL Full

This option automatically clears the System Event Log memory of all messages
when it is full. The options are Do Nothing and Erase Immediately.

Log EFI Status Codes

This option enables or disables the logging of Extensible Firmware Interface (EFI)
status codes. The options are Disabled, Both, Error Code and Progress Code.

View FRU Information


This is an informational item which displays the information pertaining to this
motherboard (FRU - Field Replaceable Unit).
BIOS SETUP UTILTY
IPMI Boot Security
[Enabled]
[Disabled]
Version x.xx.xxxx. Copyright (C) 2010 American Megatrends, Inc.
Exit
4-16
Enable/Disable
interfaces to
communicate with BMC
 : Select Screen
 : Select Item
Enter: Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit